For hard water · Protects your ioniser
A salt-free galvanic softener for water harder than 80mg/L. It reduces scale build-up on your ioniser plates and filters, with no chemicals, no salt and no ongoing maintenance.
$295.00
Not sure which fitting you need? Types 1 and 2 suit under sink systems; Type 3 suits above sink and ioniser setups. Compare fittings
Is your water hard?
Our pre-filters use chelation to handle slightly hard water. Once hardness goes above 80mg/L, which is common with bore water, a softener protects the rest of your system.
Chalky marks on your kettle, taps and sink that keep coming back.
Scale on your ioniser plates means more cleaning and a shorter life.
Bore water often carries high levels of calcium and magnesium.
A water report shows your exact hardness, so you know for sure.
Not sure? Order a water report or take the water quiz.

How it works
Each core is made from several dissimilar metals chosen from the galvanic scale.
As water flows along the core, galvanic reactions and extra turbulence change how minerals behave.
Minerals are less likely to stick, and any build-up on ioniser plates or elements wipes off more easily at your routine clean.
The difference
PreFilters galvanic softener
Salt-based (ion exchange)
Salt or chemicals
None
Needs salt to regenerate
Maintenance
None
Refill salt, replace resin
Natural minerals
Kept in the water
Removed
Running cost
Nothing after purchase
Ongoing
Installation and fitting type
The softener installs on your water supply line with minimal disruption. Choose the fitting for where it goes in your setup.

Far left
Installed before the under sink pre-filter housing (after the pressure reduction valve).
Middle
Installed after the hard line, prior to the under sink filter tee, so it treats both your filter and your tap.
Far right
Installed above the sink, before the water filter housing.
Specifications
Average flow
5 L/min
Max flow
8 L/min
Threads
½" BSP female, both ends
Length
112 mm
Material
316 stainless steel
Weight
0.25 kg
Maintenance
None. No salt, resin or filters to replace
Questions
If your water hardness is above 80mg/L, or you’re on bore water, we recommend one, especially with a water ioniser. Below that, our pre-filters handle slightly hard water on their own.
No. It changes how minerals behave so they’re less likely to form scale, and keeps calcium and magnesium in your water.
No. There’s no salt, no chemicals and no electricity, and nothing to replace.
Type 1 and 2 are for under sink systems. Type 3 is for above sink and ioniser setups.
Yes.
We use essential cookies to run the site and your basket. With your OK we also use analytics and marketing cookies to improve the site and show relevant offers. Privacy policy