Black Friday Sale
Free $160 carbon filter with any triple system. Save up to $60 + free shipping on replacement filters.
Shop the sale →
Cross-section of a rainwater tank, from roof and gutters to stored water and sludge, drawn up to a filtered kitchen tapUltraCarbonH2Roof and gutters:leaves, droppings, dustSpray drift and smokeStored rainwater:soft, slightly acidicSludge at the base
Rainwater starts clean. Then it runs off your roof, sits in a tank and settles. Each stage deals with a different part of that journey.

Tank Water

Built for rainwater. A physical barrier for what washes off the roof, and carbon for everything else, while the natural minerals stay in.

System

Twin: UltraFilter 0.01, then Carbon Ultimate Filter.
Triple: adds the H2 Booster as stage 3.

Tap

More Add-ons

A 500 kPa pressure pump is recommended for tank systems. Subscribe and save 10% on every replacement filter. Free step-by-step installation, filter replacement and cleaning guides with every system.

Under the sink or on the bench

Choose under sink to keep your bench clear, or above sink with no plumbing changes.

Sound like your water?

Tank water is only as clean as the roof it runs off and the tank it sits in. These are the things our tank customers mention most, and what handles each one.

Droppings on the roof

Birds, possums and wildlife can carry bacteria and cysts. UltraFilter 0.01 physically blocks them.

Cloudy after rain

Fresh inflow stirs up sediment. UltraFilter 0.01, with a 5-micron filter at the tank.

Earthy or musty taste

Leaves, algae and organic matter. Catalytic carbon in the Carbon Ultimate Filter.

Spray drift and smoke

Farm chemicals and bushfire ash settle on roofs. Acid-washed activated catalytic coconut carbon.

Metallic taste

Older roofs, flashing and fittings can add metals. KDF-55 in the Carbon Ultimate Filter.

Flat or acidic taste

Rainwater is soft and slightly acidic. The mineral blend lifts pH, and the H2 Booster adds ionic minerals.

How water moves through it

Every stage has one job. The twin runs stages 1 and 2. The triple adds stage 3.

1

UltraFilter 0.01

A physical barrier

A hollow-fibre membrane with 0.01 micron pores. Bacteria, viruses, cysts and fine sediment are too large to pass through, while natural minerals stay in.

2

Carbon Ultimate Filter

Taste, chemicals and metals

Layered KDF-55, acid-washed activated catalytic coconut carbon and a pH-balancing mineral blend, separated by sediment mesh.

3

Triple systems only

H2 Booster

Rainwater is naturally low in minerals. The H2 Booster adds ionic minerals back into your water and supports hydrogen output. It’s a worthwhile upgrade for any tank water household, and especially useful if you run an ioniser.

What it reduces

Estimated reduction for each stage, from our Filter Removal Specifications 2025. Water passes through every stage in order, so they work together.

ContaminantStage 1: UltraFilter 0.01Stage 2: Carbon Ultimate FilterHow
Bacteria, viruses, Giardia, Cryptosporidium99.99%+70–90%Membrane physically blocks microbes; KDF-55 is antimicrobial
Sediment and cloudiness99.99%+80–95%Membrane blocks fine particles; zeolite and carbon trap the rest
Heavy metals (lead, copper, zinc, cadmium)10–30%95–99%Membrane catches particulate forms; KDF-55 handles dissolved metals
PFAS, VOCs, pesticidesUnder 20%70–95%Acid-washed activated catalytic coconut carbon
Chlorine (if you dose your tank)Under 10%95–99%KDF-55 and catalytic carbon
Nitrates and ammoniaUnder 5%50–80%Zeolite mineral complex
Low pHNeutralLifts pHMineral blend in the Carbon Ultimate Filter

Source: PreFilters Filter Removal Specifications 2025. Estimates based on laboratory testing (ALS Brisbane), manufacturer specifications and published performance data for the filtration media used. Actual performance varies with source water quality, flow rate and filter age.

Before you install

Five things that make the difference between a system that performs for years and one that clogs in weeks.

Catch the grit first

Fit a washable 5-micron poly pleated filter at your tank outlet. It’s inexpensive, any plumber can source one, and it stops sediment choking the UltraFilter and slowing your flow.

Run a 500 kPa pump

Tank systems rely on your pump for pressure. A 500 kPa pump is recommended so water pushes through the UltraFilter and carbon at a steady, useful flow.

Look after the catchment

Clear gutters, a first-flush diverter and screened inlets keep the worst of the roof out of your tank, so your filters do less work and last longer.

Test your tank

Tank owners are responsible for their own supply. A lab test shows exactly what’s in your water, and it’s worth repeating every year or after big weather events.

Use a licensed plumber

Our under sink housings are WaterMark certified. Have a licensed plumber connect the system to your cold water line.

Filter tap not included. Use your own, or add our WaterMark-certified Dual Filter Tap.

Running an ioniser on tank water?

An ioniser needs minerals in the water to work. Rainwater is very soft, so electrolysis is weaker, pH shifts less and hydrogen output drops.

That’s what the triple’s H2 Booster is for. It adds ionic minerals that give your ioniser something to work with, after the UltraFilter and carbon have done their job. Keep up your daily 6.0 pH run and regular E-cleaning too.

Conductivity and your ioniser

Check your water’s EC (µS/cm) with a TDS/EC meter. It shows how much mineral your ioniser has to work with.

Under 150: weak150–300: adequate300–600: ideal

Nate’s rule of thumb: most rainwater sits at the low end, which is exactly where the H2 Booster earns its place.

Nathan Davis, naturopath and founder of PreFilters

Why tank water gets its own system

Rainwater feels pure. It isn’t. By the time it reaches your tap it’s crossed a roof, run through gutters, and sat in a tank, collecting bacteria, sediment, and whatever lives up there. Nobody treats it for you. A town water filter wasn’t built for this. Our tank system puts a physical barrier first, carbon second, and the H2 Booster last, because rainwater is naturally low in minerals, and your ioniser needs minerals to perform. The H2 Booster puts them back.

Nate, Naturopath and founder of PreFilters

“The water tastes smooth… the support from Nate is fantastic.”

Google review.

Filter life

UltraFilter 0.01

3 to 6 months

Rinse every 3 months. Sooner without a 5-micron filter at the tank.

Carbon Ultimate Filter

Up to 6,000 L

Or every 6 to 12 months, depending on use and water quality.

H2 Booster

Up to 6,000 L

Or every 6 to 12 months, depending on use and water quality. Triple systems only.

Subscribe and save 10% on every replacement filter. Your filters are delivered automatically every 9 months, just choose Subscribe and save on the replacement filters page.

Questions

It falls clean, but then it runs over your roof and through gutters, and sits in a tank. Droppings, leaves, dust, spray drift, smoke and sediment all end up in it, and nobody treats it for you.

Yes. A washable 5-micron poly pleated filter at the tank outlet catches grit before it reaches the UltraFilter. Without it, the membrane fills with sediment and your flow slows right down.

A 500 kPa pump is recommended for tank systems so water pushes through the filters at a good, steady flow.

The twin covers the core tank water issues: microbes, sediment, taste, chemicals and metals. The triple adds the H2 Booster, which adds ionic minerals back into soft rainwater and supports hydrogen output. It suits anyone on tank water, and it’s especially useful if you run an ioniser.

Under sink keeps your bench clear. Choose the dual tap bundle to save $50 and get filtered and regular water from one tap. Above sink needs no plumbing changes and suits anyone without a spare tap hole.

The UltraFilter 0.01 is rinsed every 3 months and replaced every 3 to 6 months. The Carbon Ultimate Filter lasts up to 6,000 litres, or 6 to 12 months depending on use and water quality. The H2 Booster (triple systems) lasts up to 6,000 litres, or 6 to 12 months. Subscribing saves 10% and keeps you on schedule.

Yes. Tank owners are responsible for their own supply. A lab test tells you exactly what’s in your water, and it’s worth repeating every year or after big weather events.

Not sure it's the right fit?

Take the two-minute water quiz and we’ll match you to the right PreFilters system for your source water and needs.

Contaminant reduction figures are estimates from the PreFilters Filter Removal Specifications 2025, based on laboratory testing (ALS Brisbane), manufacturer specifications and media performance data. Actual performance varies with source water quality, flow rate and filter age. PreFilters systems are designed for kitchen drinking water.