Black Friday Sale
Free $160 carbon filter with any triple system. Save up to $60 + free shipping on replacement filters.
Shop the sale →
Before You Install — Please Check Your Order Includes:
  • PreFilters instruction sheet + QR code flyer
  • White plastic spanner (for opening the filter housing)
  • 304-grade stainless steel tap + 3/8″ hose adapter
  • 500kPa pressure reduction valve (for town water systems)
  • 1/2″ water tee with shut-off valve
  • Two (2) 90° inlet/outlet fittings with O-rings
  • 1.5m of 3/8″ water filter hose
Please ensure all items are present before installation. If anything is missing, contact us (help@prefilters.com.au) prior to installing so we can assist promptly.Benefit: The modular design of this setup allows for future upgrades — including the addition of filters for hardness reduction or enhanced molecular hydrogen production (currently in development).Important Note: Filter tap not included. You’ll need a filter tap to dispense water from the under-sink system. We don’t supply a standard filter tap, so you can either:– Use your own filter tap. Fit it into an existing hole in your sink or benchtop. If there’s no spare hole, you’ll need to drill one to suit the tap you choose. – Replace your kitchen mixer with our Dual Filter Tap. It gives you normal hot and cold water plus filtered water from one tap, so you don’t need an extra hole.
Step 1

Under-Sink Housing Installation Overview

Begin by positioning the under-sink filter housing beneath your sink, close to the cold water line and the hole designated for the filter tap. This overview provides a clear layout of where each component will be installed.

Step 2

Connecting to the Mains Water Line

Watch the video below for a step-by-step walkthrough on how to connect your cold mains water line to the system.

Step 3

Installing the Filter Tap

To install the filter tap, you have 3 options:

  1. Use an existing sink hole – Many sinks come with an extra hole that’s capped with a metal plug.

2. Drill a new hole – If no spare hole is available, you can create a new 10mm hole in your sink or bench top.

3. Upgrade to a dual-function tap – Replace your existing kitchen tap with our dual tap, which includes a built-in filtered water outlet. This option avoids the need for any drilling and will replace your current tap.

Choose the setup that best suits your sink configuration and preferences.

Step 4

Connecting the ioniser to the Filter Tap

Once your filter tap is installed, connect your ioniser inlet hose directly to the filter tap spout. This ensures that only filtered water flows into your ioniser unit, helping to protect the internal plates and extend the machine’s lifespan. Be sure all connections are secure to prevent leaks, and turn on the filter tap slowly to check water flow before powering on your ioniser.

Overview of how the under sink system is installed and connected to the ioniser

How To Change The Housings Filters

Remember: when replacing filters to always disconnect your ioniser from your PreFilters and flush your system for 5–10 minutes before reconnecting it.

If you’re unsure which filter goes where, you can check the Filter Replacement Guide on our Replacement Filter page on our website (scroll to the description section).

Please review the full system setup to ensure all components are correctly connected.

If you have any questions or need further support as you get started, our team is here to help.

Feel free to reach out anytime at help@prefilters.com.au

Thank you for being part of this mission,

The PreFilters Team.

Need a hand?

If anything’s missing from your box or you get stuck, email us before you go further and we’ll help you sort it out.

PreFilters systems are designed for kitchen drinking water. If you’re unsure about connecting to your plumbing, use a licensed plumber.